aj
-
Integrating Non-AUTOSAR protocols in AUTOSAR Stack
Overview Integrating non-Autosar protocols in Autosar Stack can be challenging depending whether the protocol is planned to be used in SW Application mode or in bootloader mode. Autosar has standardized some Automotive communication protocols (e.g, CAN, CAN FD, LIN, FlexRay,…), but it does not cover all communication protocols. Some other protocols such as UART, SPI…
-
Protected: Building AUTOSAR Bootloader from scratch – Part 1 – Boot Architecture
There is no excerpt because this is a protected post.
-
Protected: Building EB corbos Linux for arm64 CPU based board
There is no excerpt because this is a protected post.